Stand alone CNC control kit based on 7" touch screen LCD, cubieboard2 computer (2 Core 1GHz ARM CPU, 1G RAM, 4G Nand flash, USB, Ethernet) and any of myCNC Ethernet control board (ET1, ET3, ET4, ET5) is available for preorder. Price for stand alone kit starts from $499.

PC7+ET3 (7" touch screen computer with installed myCNC, myCNC-ET3 control board) - $599 ($499 for 10+)

PC7+ET3BB (7" touch screen computer with installed myCNC, myCNC-ET3 control board, terminal blocks set) - $629 ($524 for 10+)

Upd:

7PC under testing. 8 hours working time.

Tags: Stand alone CNC | CNC control | myCNC

Hits: 14406 | Read more...

CNC control kit based on mini computer Cubiboard2, 7" LCD with touch screen
and one of myCNC Ethernet control bords (ET1, ET3, ET4, ET5) is under developing.
We have ported myCNC software to Cubieboard2 (1GHz 2x ARM Core CPU, 1G RAM,
4G Nand flash).

A complete CNC control package (7" LCD with touch screen, miniPC board with installed
myCNC software and myCNC Ethernet CNC control board) going to be very budget solution
started from as low as $549 (for ET3 CNC control board included).

Tags: CNC control | myCNC

Hits: 7598 | Read more...

We released new preview version of Pendant software for Android based tablets/smartphones.

Android-based tablet connected to local network though Wifi and uses TCP-IP Server interface
provided by myCNC  main control software. We implemented endless and step jogging, jog
speed regulation, play, pause, restart nc-program running, upload g-codes program to Host PC
machine, reset work coordinates, run homing procedure, configuration for 2,3,4,5 or 6 axes
jogging buttons.

Tags: Android | Pendant CNC software | myCNC

Hits: 9802 | Read more...

We are testing new board myCNC-ET3 - cheap ethernet CNC controller- 4 axes high speed outputs, 10x 5V TTL inputs, 10x 5V TTL outputs (3 of them can be used as PWM), 10V DAC output, RS485-modbus ASCII

Tags: myCNC | Ethernet CNC control

Hits: 7479 | Read more...

Firmware for Servo driver myServo-A01 was updated to have manual jog mode through serial console. Host PC connected to myServo driver through USB serial connection. In Jog mode there are available setup for Speed and Acceleration, Jog +, Jog - , Stop commands.

Tags: myServo-A01 | myCNC | hardware

Hits: 6546 | Read more...

Firmware for Servo driver myServo-A01 was updated to have manual jog mode through serial console. Host PC connected to myServo driver through USB serial connection. In Jog mode there are available setup Speed and Acceleration, Jog +, Jog - , Stop commands.

Tags: hardware | myCNC | myServo-A01

Hits: 6443 | Read more...

Test stand

• Asus Netbook MT101 with Touch Screen;
• myCNC-UP3 control board;
• 3x myServo-A01;
• 3x Servo BLDC motors 400W SHM60-403026ENL
• A lot of garbage around (sorry for this)

Tags: myCNC | hardware

Hits: 6662 | Read more...

There is available documentation for myTHC-RU01 Torch height controller and myServo-A01 servo driver on documentation page.

Also new 1.53 version of myCNC software available on download page.

Tags: myCNC | myCNC software

Hits: 6799 | Read more...

We updated information about our Torch height control board myTHC-RU01

Tags: hardware | myCNC

Hits: 10206 | Read more...

We are received add-on Ethernet board for our servo driver. This board and new firmware converts servo driver into one axis motion controller with integrated PLC controller (3 open collector outputs and 4 optoisolated inputs) and 1Mbytes flash memory for motion programs with Etherbnet, RS485 or USB connection with Host.

 
We are testing new revision of myTHC-RU01 - Torch height controller for plasma cutting applications. New board has more powerful Processing unit onboard (ARM Cortex-M3 100MHz CPU), compact design, optional indicator board (2 3-digits 7-segment indicators and encoder for setup Arc voltage reference value). New firmware has Modbus interface with host controller (via RS485) and may work with myCNC controllers or as indepentent stand-0alone THC controller.

On a photo below both revisions of myTHC-RU01 boards.

 We are testing new revision of myCNC-ET1.

Tags: hardware | myCNC

Hits: 9272 | Read more...

We have received new revision of myCNC-ET1 and myTHC control boards. Will start assembling the next week.

Tags: myCNC | hardware

Hits: 12583 | Read more...

We are testing now new revision of myServo-A01 driver board. Now it's one-board solution. The board contains USB slave and RS485 port for tuning/programming. Ethernet connection is possible as option (we are waiting for dock-board with Ethernet hardware level. Also the board contains 1 axis motion controller with 1MBytes flash memory for motion program.

In addition the board has 4 General purpose optoisolated inputs and 3 open collector outputs, that can be driven simultaneously with motion program.

Tags: hardware | myCNC

Hits: 9151 | Read more...