Home News / Blog Tag: hardware

Tag: hardware

admin
myServo-A01 + 400W Servo Brushless DC motor - Jog control through Serial console.
2011.09.20 13:02:07

Firmware for Servo driver myServo-A01 was updated to have manual jog mode through serial console. Host PC connected to myServo driver through USB serial connection. In Jog mode there are available setup for Speed and Acceleration, Jog +, Jog - , Stop commands.

 



Tags: myServo-A01 | myCNC | hardware

Hits: 5837 | Read more...


 
admin
myServo-A01 + 400W Servo Brushless DC motor - Jog control through Serial console.
2011.09.20 13:02:04

Firmware for Servo driver myServo-A01 was updated to have manual jog mode through serial console. Host PC connected to myServo driver through USB serial connection. In Jog mode there are available setup Speed and Acceleration, Jog +, Jog - , Stop commands.

 



Tags: hardware | myCNC | myServo-A01

Hits: 5754 | Read more...


 
admin
Test stand
2011.09.10 05:15:00

Test stand

  • Asus Netbook MT101 with Touch Screen;
  • myCNC-UP3 control board;
  • 3x myServo-A01;
  • 3x Servo BLDC motors 400W SHM60-403026ENL
  • A lot of garbage around Smile (sorry for this)

 



Tags: myCNC | hardware

Hits: 5929 | Read more...


 
admin
myTHC-RU01 - THC control board information updated
2011.01.13 14:58:22

We updated information about our Torch height control board myTHC-RU01

 



Tags: hardware | myCNC

Hits: 9474 | Read more...


 
admin
new products are coming in new 2011 year.
2011.01.06 10:25:52

We are received add-on Ethernet board for our servo driver. This board and new firmware converts servo driver into one axis motion controller with integrated PLC controller (3 open collector outputs and 4 optoisolated inputs) and 1Mbytes flash memory for motion programs with Etherbnet, RS485 or USB connection with Host.

 myServo addon Ethernet board

 

myServo motion controller with Ethernet

 
We are testing new revision of myTHC-RU01 - Torch height controller for plasma cutting applications. New board has more powerful Processing unit onboard (ARM Cortex-M3 100MHz CPU), compact design, optional indicator board (2 3-digits 7-segment indicators and encoder for setup Arc voltage reference value). New firmware has Modbus interface with host controller (via RS485) and may work with myCNC controllers or as indepentent stand-0alone THC controller.

On a photo below both revisions of myTHC-RU01 boards.

myTHC torch height controller (both revisions)

 

 We are testing new revision of myCNC-ET1.

myCNC-ET1-v2

 myCNC-ET1-v2

 



Tags: hardware | myCNC

Hits: 8545 | Read more...


 
admin
myCNC-ET1, myTHC. New boards are received.
2010.12.10 11:56:29

We have received new revision of myCNC-ET1 and myTHC control boards. Will start assembling the next week.

 myCNC-ET1 board. revision 2

 

myTHC board. revision 2



Tags: myCNC | hardware

Hits: 11903 | Read more...


 
admin
myServo-A01. New revision of driver is under testing.
2010.12.10 11:16:09

We are testing now new revision of myServo-A01 driver board. Now it's one-board solution. The board contains USB slave and RS485 port for tuning/programming. Ethernet connection is possible as option (we are waiting for dock-board with Ethernet hardware level. Also the board contains 1 axis motion controller with 1MBytes flash memory for motion program.

In addition the board has 4 General purpose optoisolated inputs and 3 open collector outputs, that can be driven simultaneously with motion program.

 myServo-A01 - AC/DC brushless servo motor driver/controller



Tags: hardware | myCNC

Hits: 8480 | Read more...


 

Latest News